Back to Armoured Cables Overview

XLPE Insulated Round SWA Low Voltage Cable

Code: YXZ2V

Construction                                
  1. Copper conductor
  2. XLPE insulation
  3. Filler
  4. Separation sheath
  5. Galvanized round steel wire armouring
  6. Galvanized steel tape
  7. PVC outer sheath                                

                             
Standard

  • BS 5467
  • IEC 60502
  • TS IEC 60502 - 1                            

Application

  • Mainly used in populated areas, power and switching stations underground.
  • Steel wire protects the cable from any mechanical damage.

Voltage                                

  • Rated Voltage:    Uo/U = 0.6/1 kV
  • AC test voltage:    3.5 kV                     

Technical Data

  • Maximum operating temperature 90°C
  • Short-circuit temperature 250°C
  • Current carrying capacity values given below are rated at 20°C earth temperature, at 30ºC free air temperature, 1 K.m/W and 0.7 charging conditions
Nomimal cross section Conductor insulation thickness Sheath thickness Overall diameter approx. Net weight approx. Standard delivery length Type packing, coil or drum size Conductor DC resistance at 20°c max. Current carrying capacity
mm²   mm mm mm kg/km m cm Ohm/km A  A 
3x1,5 re 0,7 1,8 14,0 360 1000 100 12,1 26 18
3x2,5 re 0,7 1,8 15,0 450 1000 100 7,41 34 25
3x4 re 0,7 1,8 17,0 660 1000 110 4,61 44 34
3x6 re 0,7 1,8 19,0 760 1000 120 3,08 56 43
3x10 rm 0,7 1,8 21,0 960 1000 120 1,83 75 60
3x16 rm 0,7 1,8 22,0 1210 1000 130 1,15 98 80
4x1,5 re 0,7 1,8 15,0 420 500 100 12,1 26 18
4x2,5 re 0,7 1,8 17,0 610 500 110 7,41 34 25
4x4 re 0,7 1,8 19,0 750 500 120 4,61 44 34
4x6 re 0,7 1,8 20,0 875 500 120 3,08 56 43
4x10 rm 0,7 1,8 22,0 1135 250 130 1,83 75 60